מה ההבדל בין משרן למשרן | תרגיש טוב

What is the difference between an inductor and an inductor?Let's follow the מפעל ההשראות כדי להבין:

סליל השראות

הסליל מורכב מחוט התפתל סביב סביב צינור בידוד המבודד זה מזה, וצינור הבידוד עשוי להיות חלול, או עשוי להכיל ליבת ברזל או ליבת אבקה מגנטית.

Inductance coils are devices that work on the principle of electromagnetic induction.When an electric current flows through a wire, an electromagnetic field is generated around the wire, and the wire itself is induced to the wire in the electromagnetic field.The effect on the wire itself, which produces the electromagnetic field, is called "self-induction", that is, the changing current generated by the wire itself produces a changing magnetic field, which further affects the current in the wire;The effect on other wires in this electromagnetic field range is called mutual inductance.

The electrical properties of an inductor coil are the opposite of those of a capacitor, "switching low frequencies and blocking high frequencies".High frequency signal will encounter great resistance when passing through the inductance coil, and it is difficult to pass.The resistance to the low-frequency signal passing through it is relatively small, that is, the low-frequency signal can pass through it easily.The resistance of an inductor to direct current is almost zero.

Resistance, capacitance, and inductance all exhibit resistance to the flow of electrical signals in a circuit. This resistance is called "impedance".The impedance of an inductor to a current signal utilizes the coil's self-induction.Inductance coils are sometimes referred to simply as "inductance" or "coil", denoted by the letter "L".When winding an inductor coil, the number of turns of the coil wound is commonly referred to as the number of turns of the coil.

https://www.inductorchina.com/common-mode-choke-getwell.html

מסנן חנק במצב נפוץ

משרן

משרנים הם רכיבים שניתן לאחסן על ידי המרת אנרגיה חשמלית לאנרגיה מגנטית. משרן דומה במבנהו לשנאי אך יש לו רק סלילה אחת. למשרן יש אינדוקציה מסוימת שרק מונעת שינוי בזרם. אם המשרן נמצא מצב של העברת זרם, הוא ינסה למנוע זרם לזרום דרכו כאשר המעגל סגור; אם המשרן נמצא במצב נוכחי, הוא ינסה להחזיק את הזרם קבוע כאשר המעגל מנותק. המשרן נקרא גם חנק , כור, כור דינמי.

השראה עשויה להיעשות על ידי סלילת ליבה מגנטית עם חומר מוליך, בדרך כלל חוט נחושת, או על ידי הסרת הליבה או החלפתה בחומר פרומגנטי. חומר ליבה בעל חדירות גבוהה יותר מאוויר יכול להגביל את השדה המגנטי בצורה הדוקה יותר סביב אלמנט המשרן, ובכך מגביר את ההשראה. ישנם סוגים רבים של משרנים, שרובם מצופים בסלילי אמייל עטופים סביב צירי פריט, בעוד שחלק מהמשרנים המגנים מציבים את הסלילים לחלוטין בתוך הפריט. ניתן להתאים את הליבות של כמה משרנים. ניתן לשנות את ההשראות. משרנים קטנים יכולים להיחרט ישירות על גבי ה- PCB, בשיטה של ​​הנחת מסלולים ספירליים. משרנים בעלי ערך קטן יכולים להיעשות גם במעגלים משולבים באותו תהליך כמו טרנזיסטורים. ביישומים אלה, חיבורי אלומיניום הם משמש לעתים קרובות כחומרים מוליכים. כך או כך, האילוץ הנפוץ ביותר המבוסס על שימוש בפועל הוא מעגל הנקרא רוטטור, המשתמש בקבל וב- רכיב ctive להפגין את אותם מאפיינים כמו משרן. מוליכים המשמשים לבידוד תדרים גבוהים מורכבים לרוב מחוט העובר דרך עמוד מגנטי או חרוז.

https://www.inductorchina.com/smd-molding-power-inductor-sgt-getwell.html

SMD יצוק משרן כוח -SGT

סליל ההשראות שונה מהמשרן

סליל המשרן הוא חלק חשוב במשרן. מכיוון שהמשרן מורכב בדרך כלל משלד, סלילה (סליל), מגן, חומרי אריזה, ליבה מגנטית או ליבה וכו '.

משרנים הם רכיבים שניתן לאחסן על ידי המרת אנרגיה חשמלית לאנרגיה מגנטית. משרן דומה במבנהו לשנאי אך יש לו רק סלילה אחת. למשרן יש אינדוקציה מסוימת שרק מונעת שינוי בזרם. אם המשרן נמצא מצב של העברת זרם, הוא ינסה למנוע זרם לזרום דרכו כאשר המעגל סגור; אם המשרן נמצא במצב נוכחי, הוא ינסה להחזיק את הזרם קבוע כאשר המעגל מנותק. המשרן נקרא גם חנק , כור, כור דינמי.

Inductance coils are devices that work on the principle of electromagnetic induction.When an electric current flows through a wire, an electromagnetic field is generated around the wire, and the wire itself is induced to the wire in the electromagnetic field.The effect on the wire itself, which produces the electromagnetic field, is called "self-induction", that is, the changing current generated by the wire itself produces a changing magnetic field, which further affects the current in the wire;The effect on other wires in this electromagnetic field range.

https://www.inductorchina.com/radial-inductor-1mh-rlp0913w3r-6-5mh-e-getwell.html

משרן רדיאלי 1mh RLP0913W3R-6.5MH-E

האמור לעיל הוא סליל השראות ואינדוקציה יש להבחין: אנו יצרן משרנים , ברוכים הבאים להכיר את: משרן צירי, משרן רדיאלי....


זמן פרסום: דצמבר 16-2020