Discount Price Coil Toroid Inductor - SMD molding Power Inductor -SGT | GETWELL – Getwell
Discount Price Coil Toroid Inductor - SMD molding Power Inductor -SGT | GETWELL – Getwell Detail:
SMD Molding power choke feature & characteristic:
◆high current rating
◆high frequency range up to 5 MHz
◆very low DC resistance
◆shielded construction
◆low noise
◆ultra low cost
◆Rohs compliant
Application:
◆PDA/Notebook/Desktop/Server applications
◆DC/DC comverter
◆inductor for general purpose use
Contact Us And Get Free Samples!NOW!
Write your message here and send it to us
Inductor smd datasheet
| Part Number | A(mm) | B(mm) | C(mm) | D(mm) | E(mm) | SPQ | |||||||
| 0312 | 3.50±0.20 | 3.2±0.20 | 1.00±0.20 | 0.70±0.20 | 1.20±0.20 | 4K | |||||||
| 0302 | 3.50±0.20 | 3.2±0.20 | 1.80±0.20 | 0.70±0.20 | 1.20±0.20 | 3K | |||||||
| 0412 | 4.45±0.25 | 4.06±0.25 | 1.00±0.20 | 0.76±0.30 | 2.00±0.20 | 3K | |||||||
| 0402 | 4.45±0.25 | 4.06±0.25 | 1.80±0.20 | 0.76±0.30 | 2.00±0.20 | 4K | |||||||
| 0512 | 5.70±0.30 | 5.20±0.20 | 1.00±0.20 | 1.10±0.30 | 2.50±0.30 | 3K | |||||||
| 0515 | 5.70±0.30 | 5.20±0.20 | 1.30±0.20 | 1.10±0.30 | 2.50±0.30 | 3.5K | |||||||
| 0518 | 5.70±0.30 | 5.20±0.20 | 1.60±0.20 | 1.10±0.30 | 2.50±0.30 | 3K | |||||||
| 0612 | 7.00±0.30 | 6.60±0.30 | 1.00±0.20 | 1.8±0.30 | 3.00±0.30 | 3K | |||||||
| 0615 | 7.00±0.30 | 6.60±0.30 | 1.30±0.20 | 1.8±0.30 | 3.00±0.30 | 2K | |||||||
| 0618 | 7.00±0.30 | 6.60±0.30 | 1.60±0.20 | 1.8±0.30 | 3.00±0.30 | 1.5K | |||||||
| 0602 | 7.00±0.30 | 6.60±0.30 | 1.80±0.20 | 1.8±0.30 | 3.00±0.30 | 1.5K | |||||||
| 0624 | 7.00±0.30 | 6.60±0.30 | 2.20±0.20 | 1.8±0.30 | 3.00±0.30 | 0.5K | |||||||
| 0603 | 7.30±0.30 | 6.60±0.30 | 2.80±0.20 | 1.8±0.30 | 3.00±0.30 | 0.5K | |||||||
| 0605 | 7.30±0.30 | 6.60±0.30 | 4.80±0.20 | 1.8±0.30 | 3.00±0.30 | 0.5K | |||||||
| 1004 | 11.00±0.50 | 10.00±0.30 | 3.80±0.20 | 2.3±0.30 | 3.00±0.30 | 0.5K | |||||||
| 1005 | 11.00±0.50 | 10.00±0.30 | 4.80±0.20 | 2.3±0.30 | 3.00±0.30 | 0.5K | |||||||
| 1235 | 13.50±0.50 | 12.50±0.30 | 3.30±0.20 | 2.3±0.30 | 4.70±0.30 | 0.5K | |||||||
| 1205 | 13.50±0.50 | 12.50±0.30 | 4.80±0.20 | 2.3±0.30 | 4.70±0.30 | 0.5K | |||||||
| 1206 | 13.50±0.50 | 12.50±0.30 | 5.70±0.30 | 2.3±0.30 | 4.70±0.30 | 0.5K | |||||||
| 1265 | 13.50±0.50 | 12.50±0.30 | 6.20±0.30 | 2.3±0.30 | 4.70±0.30 | 0.5K | |||||||
| 1707 | 17.60±0.40 | 16.90±0.30 | 6.70±0.30 | 2.10±0.30 | 11.90±0.30 | 0.3K | |||||||
| Molding Type Power Inductor TMPC0312H Series |
|||||||||||||
| Part Number | Inductance L0(uH) | I rms (A) typ. | I sat (A) typ. | DCR (mΩ）typ.@25℃ | DCR (mΩ）max.@25℃ | ||||||||
| TMPC0312H-R47MG | 0.47±20% | 5.00 | 7.20 | 25 | 30 | ||||||||
| TMPC0312H-R56MG | 0.56±20% | 4.50 | 6.60 | 31 | 36 | ||||||||
| TMPC0312H-R68MG | 0.68±20% | 4.00 | 6.10 | 34 | 40 | ||||||||
| TMPC0312H-R82MG | 0.82±20% | 3.50 | 5.80 | 41 | 48 | ||||||||
| TMPC0312H-1R0MG | 1.00±20% | 3.30 | 5.50 | 50 | 60 | ||||||||
| TMPC0312H-1R5MG | 1.50±20% | 3.00 | 4.00 | 71 | 85 | ||||||||
| TMPC0312H-2R2MG | 2.20±20% | 2.70 | 3.40 | 98 | 115 | ||||||||
| TMPC0312H-3R3MG | 3.30±20% | 2.00 | 3.10 | 191 | 210 | ||||||||
| TMPC0312H-4R7MG | 4.70±20% | 1.60 | 2.80 | 266 | 293 | ||||||||
| TMPC0312H-5R6MG | 5.60±20% | 1.50 | 2.20 | 310 | 360 | ||||||||
| TMPC0312H-6R8MG | 6.80±20% | 1.40 | 2.00 | 360 | 400 | ||||||||
| TMPC0312H-8R2MG | 8.20±20% | 1.20 | 1.70 | 420 | 463 | ||||||||
| TMPC0312H-100MG | 10.0±20% | 1.00 | 1.40 | 498 | 550 | ||||||||
| Molding Type Power Inductor TMPC0302H Series |
|||||||||||||
| Part Number | Inductance L0(uH) | I rms (A) typ. | I sat (A) typ. | DCR (mΩ）typ.@25℃ | DCR (mΩ）max.@25℃ | ||||||||
| TMPC0302H-R10YG | 0.10±30% | 10.50 | 14.00 | 6.6 | 9 | ||||||||
| TMPC0302H-R47MG | 0.47±20% | 7.00 | 9.00 | 19.7 | 23 | ||||||||
| TMPC0302H-R68MG | 0.68±20% | 5.50 | 7.00 | 25.5 | 29 | ||||||||
| TMPC0302H-1R0MG | 1.00±20% | 4.00 | 5.00 | 32.0 | 38 | ||||||||
| TMPC0302H-2R2MG | 2.20±20% | 3.50 | 3.70 | 65.0 | 75 | ||||||||
| TMPC0302H-3R3MG | 3.30±20% | 3.00 | 3.50 | 125.0 | 145 | ||||||||
| TMPC0302H-4R7MG | 4.70±20% | 2.60 | 3.00 | 172.0 | 200 | ||||||||
| TMPC0302H-5R6MG | 5.60±20% | 2.20 | 2.60 | 205.0 | 238 | ||||||||
| TMPC0302H-6R8MG | 6.80±20% | 1.90 | 2.20 | 260.0 | 300 | ||||||||
| TMPC0302H-100MG | 10.0±20% | 1.40 | 1.60 | 366.0 | 422 | ||||||||
| Molding Type Power Inductor TMPC0402HP Series |
|||||||||||||
| Part Number | Inductance L0 (uH)±20% | I rms (A) typ. | I sat (A) typ. | DCR (mΩ）typ.@25℃ | DCR (mΩ）max.@25℃ | ||||||||
| TMPC0402HP-R33MG-Z02 | 0.33 | 10.00 | 18.00 | 7.8 | 8.6 | ||||||||
| TMPC0402HP-R47MG-Z02 | 0.47 | 8.00 | 12.00 | 11.2 | 14 | ||||||||
| TMPC0402HP-R68MG-Z02 | 0.68 | 7.00 | 10.00 | 16.0 | 19 | ||||||||
| TMPC0402HP-1R0MG-Z02 | 1.00 | 5.00 | 8.50 | 22.0 | 27 | ||||||||
| TMPC0402HP-2R2MG-Z02 | 2.20 | 4.00 | 6.00 | 51.0 | 61 | ||||||||
| TMPC0402HP-3R3MG-Z02 | 3.30 | 3.50 | 4.00 | 69.0 | 76 | ||||||||
| TMPC0402HP-4R7MG-Z02 | 4.70 | 2.60 | 3.50 | 95.0 | 105 | ||||||||
| TMPC0402HP-6R8MG-Z02 | 6.80 | 2.10 | 2.80 | 150.0 | 172 | ||||||||
| TMPC0402HP-100MG-Z02 | 10.00 | 1.80 | 2.30 | 215.0 | 243 | ||||||||
| TMPC0402HP-220MG-Z02 | 22.00 | 1.20 | 1.40 | 470.0 | 500 | ||||||||
| Molding Type Power Inductor TMPC0512HP Series |
|||||||||||||
| Part Number | Inductance L0 (uH)±20% | I rms (A) typ. | I sat (A) typ. | DCR (mΩ）typ.@25℃ | DCR (mΩ）max.@25℃ | ||||||||
| TMPC0512HP-R10YG-D | 0.10±30% | 14.00 | 14.50 | 4.3 | 5.2 | ||||||||
| TMPC0512HP-R47MG-D | 0.47 | 7.00 | 11.00 | 13.6 | 15.8 | ||||||||
| TMPC0512HP-R68MG-D | 0.68 | 6.00 | 9.00 | 21.5 | 24.5 | ||||||||
| TMPC0512HP-1R0MG-D | 1.00 | 5.00 | 6.00 | 26.0 | 30 | ||||||||
| TMPC0512HP-2R2MG-D | 2.20 | 3.50 | 4.00 | 65.0 | 75 | ||||||||
| TMPC0512HP-3R3MG-D | 3.30 | 3.00 | 3.80 | 75.0 | 86 | ||||||||
| TMPC0512HP-4R7MG-D | 4.70 | 2.50 | 3.20 | 100.0 | 115 | ||||||||
| TMPC0512HP-5R6MG-D | 5.60 | 2.40 | 3.20 | 175.0 | 201 | ||||||||
| TMPC0512HP-6R8MG-D | 6.80 | 2.00 | 3.00 | 193.0 | 222 | ||||||||
| TMPC0512HP-100MG-D | 10.00 | 1.50 | 1.80 | 335.0 | 385 | ||||||||
| Molding Type Power Inductor TMPC0602H Series |
|||||||||||||
| Part Number | Inductance L0 (uH)±20% | I rms (A) typ. | I sat (A) typ. | DCR (mΩ）typ.@25℃ | DCR (mΩ）max.@25℃ | ||||||||
| TMPC0602H-R10YG-D | 0.10±30% | 14.00 | 14.50 | 4.3 | 5.2 | ||||||||
| TMPC0602H-R10YG-D | 0.47 | 7.00 | 11.00 | 13.6 | 15.8 | ||||||||
| TMPC0602H-R10YG-D | 0.68 | 6.00 | 9.00 | 21.5 | 24.5 | ||||||||
| TMPC0602H-R10YG-D | 1.00 | 5.00 | 6.00 | 26.0 | 30 | ||||||||
| TMPC0602H-R10YG-D | 2.20 | 3.50 | 4.00 | 65.0 | 75 | ||||||||
| TMPC0602H-R10YG-D | 3.30 | 3.00 | 3.80 | 75.0 | 86 | ||||||||
| TMPC0602H-R10YG-D | 4.70 | 2.50 | 3.20 | 100.0 | 115 | ||||||||
| TMPC0602H-R10YG-D | 5.60 | 2.40 | 3.20 | 175.0 | 201 | ||||||||
| TMPC0602H-R10YG-D | 6.80 | 2.00 | 3.00 | 193.0 | 222 | ||||||||
| TMPC0602H-R10YG-D | 10.00 | 1.50 | 1.80 | 335.0 | 385 | ||||||||
| TMPC0602H-220MG-D | 22.00 | 1.50 | 2.50 | 236.0 | 280 | ||||||||
| Molding Type Power Inductor TMPC0605H Series |
|||||||||||||
| Part Number | Inductance L0 (uH)±20% | I rms (A) typ. | I sat (A) typ. | DCR (mΩ）typ.@25℃ | DCR (mΩ）max.@25℃ | ||||||||
| TMPC0605H-R33MG-D | 0.33 | 25.00 | 32.00 | 2.5 | 3 | ||||||||
| TMPC0605H-R47MG-D | 0.47 | 22.00 | 30.00 | 3.5 | 3.9 | ||||||||
| TMPC0605H-R68MG-D | 0.68 | 18.00 | 24.00 | 4.0 | 4.5 | ||||||||
| TMPC0605H-1R0MG-D | 1.00 | 15.00 | 20.00 | 6.1 | 6.5 | ||||||||
| TMPC0605H-2R2MG-D | 2.20 | 10.00 | 14.00 | 11.2 | 12 | ||||||||
| TMPC0605H-3R3MG-D | 3.30 | 8.00 | 12.00 | 19.0 | 20.9 | ||||||||
| TMPC0605H-4R7MG-D | 4.70 | 6.50 | 10.00 | 28.0 | 30.8 | ||||||||
| TMPC0605H-5R6MG-D | 5.60 | 6.00 | 9.00 | 43.5 | 49 | ||||||||
| TMPC0605H-6R8MG-D | 6.80 | 5.50 | 8.50 | 46.0 | 51.5 | ||||||||
| TMPC0605H-100MG-D | 10.00 | 4.00 | 7.50 | 60.0 | 69 | ||||||||
| TMPC0605H-220MG-D | 22.00 | 2.50 | 5.50 | 140.0 | 170 | ||||||||
| Molding Type Power Inductor TMPC1004H Series |
|||||||||||||
| Part Number | Inductance L0 (uH)±20% | I rms (A) typ. | I sat (A) typ. | DCR (mΩ）typ.@25℃ | DCR (mΩ）max.@25℃ | ||||||||
| TMPC1004H-R15YG-D | 0.15±30% | 43.00 | 75.00 | 0.5 | 0.6 | ||||||||
| TMPC1004H-R47MG-D | 0.47 | 28.00 | 43.00 | 1.3 | 1.5 | ||||||||
| TMPC1004H-R68MG-D | 0.68 | 22.00 | 39.00 | 2.4 | 2.7 | ||||||||
| TMPC1004H-1R0MG-D | 1.00 | 18.00 | 36.00 | 3.0 | 3.3 | ||||||||
| TMPC1004H-2R2MG-D | 2.20 | 12.00 | 27.00 | 6.5 | 7 | ||||||||
| TMPC1004H-3R3MG-D | 3.30 | 11.00 | 20.00 | 10.8 | 11.8 | ||||||||
| TMPC1004H-4R7MG-D | 4.70 | 10.00 | 17.00 | 15.0 | 15.5 | ||||||||
| TMPC1004H-5R6MG-D | 5.60 | 9.00 | 14.00 | 17.0 | 19.3 | ||||||||
| TMPC1004H-6R8MG-D | 6.80 | 8.50 | 13.50 | 17.5 | 23.3 | ||||||||
| TMPC1004H-8R2MG-D | 8.20 | 8.00 | 12.50 | 20.0 | 22.5 | ||||||||
| TMPC1004H-100MG-D | 10.00 | 7.50 | 12.00 | 27.0 | 30 | ||||||||
| TMPC1004H-200MG-D | 22.00 | 5.00 | 7.00 | 64.0 | 74 | ||||||||
|
|||||||||||||
Remark:
Special inquiries besides the above common used types can be met on your requirement.
150uh smd inductor
SMD Molding power choke
People also ask：
1.What Are The Advantages Of Chip Inductors
2. The difference between inductor and ordinary inductor
3. Overview of Inductance Properties
4. Causes of failure of patch power inductor
5. Choose the appropriate inductor for switching power supply
6. The influence of the number of differential mode inductors
Learn more about GETWELL products
Wire wound chip inductors
Multilayer chip ceramics inductors
power supply inductor-SGA73
Product detail pictures:
Related Product Guide:
Planet Fitness on Knickerbocker closed due to power outage | Power Smd Inductor
Distribution Transformer Market to Witness Widespread Expansion During 2025 | General Electric, Siemens AG | Small Electrical Transformer
It really is a good way to further improve our goods and service. Our mission would be to acquire inventive items to buyers with a very good encounter for Discount Price Coil Toroid Inductor - SMD molding Power Inductor -SGT | GETWELL – Getwell, The product will supply to all over the world, such as: Botswana, kazan, US, we've got all day online sales to make sure the pre-sale and after-sale service in time. With all these supports, we can serve every customer with quality product and timely shipping with highly responsibility. Being a young growing company, we might not the best, but we are trying our best to be your good partner.
By Judith from Iceland - 2017.11.20 15:58
The accounts manager made a detailed introduction about the product, so that we have a comprehensive understanding of the product, and ultimately we decided to cooperate.
By Christopher Mabey from Lyon - 2017.01.28 19:59
