Circuit resonance and choke reactance of SMT inductors | GETWELL

 The smd inductors are required to realize two basic functions: circuit resonance and reactance.Resonance circuit includes resonance generation circuit, oscillation circuit, clock circuit, pulse circuit, waveform generation circuit and so on.The resonant circuit also includes a high Q bandpass filter circuit.To make the circuit resonant, the SMD capacitance and SMD inductance must exist in the circuit simultaneously.

  There are parasitic capacitors at both ends of the patch inductance, which is caused by the ferrite body between the two electrodes of the device being equivalent to the capacitive medium.In the resonant circuit, the inductor must have high Q, small tolerance and stable temperature coefficient, so as to meet the requirements of narrow band and low frequency temperature drift of the resonant circuit.High Q circuits have sharp resonance peaks.Inductance bias with small tolerance ensures minimum resonance frequency deviation.The stable temperature coefficient guarantees the stable temperature variation characteristic of the resonant frequency.The difference between the standard radial inductance and axial inductance and the SMT inductance is only in the package.

  The inductance structure of the patch includes coil wound on dielectric material (usually alumina ceramic material), or hollow coil and coil wound on ferromagnetic material.

  In power inductor applications, when used as a choke coil, the main inductor parameters are dc resistance (DCR), rated current, and low Q value.When used as a filter, it is necessary to look at the broadband characteristics, so the high Q characteristics of the inductor are not required.A low DCR, defined as the dc resistance of a component in the absence of an ac signal, ensures a minimum voltage drop.

  GETWELL electronics is a professional SMT inductor manufacturer located in guangdong province, China.Let me show you our inductor: SMD coil Inductor,220uh SMD inductor,100uh inductor SMD,22uh inductor SMD;

 


Post time: Aug-12-2019